Omron H2F Series User Manual

2 24-hour/Weekly Time Switch H2F
Ordering Information
■ Accessories (Order Separately)
Note: 24-hour type is supplied with three pairs of programming tabs.
1-week type is supplied with seven pairs of programming tabs.
Specifications
■ Time Ranges
■ ON/OFF Cycle
■ Ratings
Note: Select the appropriate frequency using the frequency selector switch provided on the upper part of the rear panel.
Mounting method Control output 24-hour operation 1-week operation
Synchronous motor Quartz motor (with
memory protection)
Quartz motor (with
memory protection)
Flush SPST-NO H2F-D H2F-DM H2F-WM
SPDT H2F-DC H2F-DMC H2F-WMC
Surface/track SPST-NO H2F-DF H2F-DMF H2F-WMF
SPDT H2F-DFC H2F-DMFC H2F-WMFC
Extra programming tabs 1 pair for each ON/OFF (see note) Y92S-21
Rechargeable Battery Y92S-22
Operation period Minimum division Minimum set time Maximum set time
24-hour 15 min 15 min 23 hrs 45 min
1-week 1 hr 2 hrs 166 hrs
Operation period 24-hour 1-week
Maximum cycles 96 84
Rated supply voltage Synchronous motor: 100/110/120 VAC, 200/220/240 VAC (50/60 Hz) (see note)
Quartz motor: 100 to 240 VAC (50/60 Hz)
Operating voltage range 85% to 110% of rated supply voltage
Power consumption Synchronous motor: 3 VA max.
Quartz motor: 1 VA max. at 100 to 120 VAC, 4 VA max. at 200 to 240 VAC
Control outputs 15 A at 250 VAC, resistive load, SPST-NO, SPDT
Terminal screw tightening torque 0.98 N·m max.
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron H2F Series Specifications

General

Brand	Omron
Model	H2F Series
Category	Timer
Language	English