14
Normative
References
EN50081-1
1992
Electromagnetic compatibility --
Emission standard
Part 1: Residential, commercial and light industry
EN50081-2
1993
Electromagnetic compatibility --
Emission standard
Part 2: Industrial environment
EN50082-1
1992
Electromagnetic compatibility --
Immunity standard
Part 1: Residential, commercial and light industry
prEN50082-2
1994
Electromagnetic compatibility --
Immunity standard
Part 2: Industrial environment
EN55011
1990
Limits and methods of measurement of radio disturbance charac-
teristics of industrial, scientific and medial (ISM) radio-frequency
equipment
EN55022
1985
Limits and methods of measurement of radio disturbance charac-
teristics of information technology equipment
EN60204-1
1992
Safety of machinery --
Electrical equipment of machines
Part 1: General requirements
EN61000-4-8
1993
Electromagnetic compatibility
Part 4: Testing and measurement techniques
Section 8: Power frequency magnetic field immunity test
ENV50140
1993
Electromagnetic compatibility --
Basic immunity standard
Radiated, radio-frequency electromagnetic field --
Immunity test
ENV50141
1993
Electromagnetic compatibility --
Basic immunity standard
Conducted disturbances inducted by radio-frequency fields --
Immunity test
IEC801-2
1991
Electromagnetic compatibility for industrial-process measurement
and control equipment
Part 2: Electrostatic discharge requirements
IEC801-3
1984
Electromagnetic compatibility for industrial-process measurement
and control equipment
Part 3: Radiated electromagnetic field requirements
IEC801-4
1988
Electromagnetic compatibility for industrial-process measurement
and control equipment
Part 4: Electrical fast transient/burst requirements
IEC801-5 (Draft)
1993
Electromagnetic compatibility for industrial-process measurement
and control equipment
Part 5: Surge voltage immunity requirements
IEC801-6 (Draft)
1993
Electromagnetic compatibility for industrial-process measurement
and control equipment
Part 6: Immunity to conducted disturbances induced by radio fre-
quency fields.
IEC68-2-2
1974
Environmental testing
Tests B: Dry heat
IEC68-2-30
1980
Environmental testing
Test Db and guidance: Damp heat, cyclic (12 + 12 hour cycle)
IEC68-2-36
1973
Environmental testing
Test Fdb: Random vibration wide band
Reproducibility Medium
IEC529
1983
Degrees of protection provided by enclosures
MIL-STD-810E
1989
Method 514.4: Vibration
ASTM D 4728
1987
Standard test method for random vibration testing of shipping con-
tainers
Note: Abbreviations
EMC: Electromagnetic compatibility
EMS: Electromagnetic susceptibility
EMI: Electromagnetic interference
RF: Radio frequency
ISM: Industrial, scientific and medical equipment
To Next Page
Loading...
Need help?
General
