265
24-hour/Weekly Time Switch H2F
Up to 96 ON/OFF Cycles from DIN-sized
(72 x 72 mm) Timer
Easy setting with color-coded programming tabs.
Choose 24-hour or 1-week models with either
SPST-NO or SPDT control outputs.
Minute dial assures accurate settings.
Models with memory protection available.
Control outputs can be manually turned ON/OFF.
Designed for surface, flush, or track mounting.
RC
Ordering Information
Mounting method Control output 24-hour operation 1-week operation
Synchronous motor Quartz motor (with
memory protection)
Quartz motor (with
memory protection)
Flush SPST-NO H2F-D H2F-DM H2F-WM
SPDT H2F-DC H2F-DMC H2F-WMC
Surface/track SPST-NO H2F-DF H2F-DMF H2F-WMF
SPDT H2F-DFC H2F-DMFC H2F-WMFC
Accessories (Order Separately)
Extra programming tabs 1 pair for each ON/OFF Y92S-21
Note: 24-hour type is supplied with three pairs of programming tabs.
1-week type is supplied with seven pairs of programming tabs.
Specifications
Time Ranges
Operation period Minimum division Minimum set time Maximum set time
24-hour 15 min 15 min 23 hrs 45 min
1-week 1hr 2hrs 166 hrs
On/OFF Cycle
Operation period 24-hour 1-week
Maximum cycles 96 84
Ratings
Rated supply voltage Synchronous motor: 100/110/120 VAC, 200/220/240 VAC (50/60 Hz) (see note)
Quartz motor: 100 to 240 VAC (50/60 Hz)
Operating voltage range 85% to 110% of rated supply voltage
Power consumption Synchronous motor: 3 VA max.
Quartz motor: 1 VA max. at 100 to 120 VAC, 4 VA max. at 200 to 240 VAC
Control outputs 15 A at 250 VAC, resistive load, SPST-NO, SPDT
Note: Refer to
“Precautions”
.
To Next Page
Loading...
Need help?
General
