To Next Page

To Previous Page

H5L

263

Installation

Wiring

Wiring From the Rear

Perform wiring from the rear of the unit when the unit is flush

mounted.

Wiring From the Front

Perform wiring from the front of the unit when the unit is track orsur-

face mounted.

1. Loosen the screw on the left side of the front.

2. Slide the upper part of the unit approx. 15 mm upward.

3. After the terminals appear, perform wiring.

4. Return the upper part of the unit to the original position and

tighten the screw.

Connections

Connect the power supply between terminals

and

, the load for

the first circuit between terminals

and

, and the load for the se-

cond circuit between terminals

and

. Terminals

and

are no

connects.

Note: To each load, connect the power supply for load.

Omron H5CN User Manual

Other manuals for Omron H5CN