Omron HBF-400 User Manual

INTRODUCTION
3
Thank you for purchasing the OMRON
®
HBF-400 Fat Loss MONITOR with Scale.
The Fat Loss Monitor with Scale is easy to understand. The monitor displays the calculated value of
body fat percentage using the BI (Bioelectrical Impedance) Method and indicates the BMI (Body Mass
Index) in four ranges. Set your personal data. Push the power switch on, select your personal ID number,
and step onto the measurement platform. Your calculated body fat percentage and body mass index is
displayed in an easy-to-see screen. The personal memory function stores up to four personal profiles.
The memory function stores the results of the last measurement taken for each personal ID number
.
Your HBF-400 comes with the following components:
•
Main Unit
•
Instruction Manual
• 4 “AA” Batteries
Read all the information in the instruction book before using the unit.
Staple your purchase receipt here
Fill in for future reference.
DATE PURCHASED:
SERIAL NUMBER:
SAVE THESE INSTRUCTIONS
WARNING!
This monitor cannot be used with a cardiac pacemaker or other implanted medical devices.
The Fat Loss MONITOR with Scale passes an extremely weak electrical current of 50kHz and less
than 500 µA through your body when taking a measurement to determine the amount of fat tissue.
This weak electrical current is not felt while using the monitor. Do not use, or allow others to use,
this monitor if fitted with a cardiac pacemaker or other medical device.
HBF-400-IM 2/20/06 5:50 PM Page 3

Omron HBF-400 Specifications

General

Type	Electronic personal scale
Accuracy	100 g
Control type	Sensor
Product color	Beige, Yellow
Auto power off	Yes
Number of users	4 user(s)
Maximum weight capacity	150 kg
Battery type	AA
Number of batteries supported	4

Weight and Dimensions

Depth	300 mm
Width	305 mm
Height	57 mm
Weight	2086 g