16
KNOW YOUR UNIT
USING THE DISPLAY UNIT
1. Remove the Display Unit from the Display Unit Holder
on the monitor.
2. To store the cord into the Display Unit Holder,
make sure the cord is coiled evenly, and does not
stick out of the Display Unit Holder.
3. Place the Display Unit into the Display Unit
Holder.
The display unit will click into place.
POWER SWITCH
The power switch is located at the front of the monitor.
Press the power switch to turn the monitor on and off.
The power will automatically switch off in the following conditions:
1. If the monitor is not used within one minute of 0.0 lb appearing on the display.
2. If no information is entered for five minutes when entering personal data.
3. If the monitor is not used for five minutes after the measurement results are
displayed.
4. Five minutes after the result is displayed when measuring weight only.
To Next Page
Loading...
Need help?
General