Omron HBP-1120 User Manual

15
EN
Applying the Cuff to the Patient
The device can be used on either
the right or left arm.
Wrap the cuff on a bare arm or
over thin clothing. Thick clothing
or a rolled up sleeve will cause
inaccurate blood pressure
measurements.
1. Make sure the cuff tube is not bent.
The cuff tube should be on the peripheral side.
2. Wrap the cuff so that the INDEX ARTERY “ ´LVGLUHFWO\RYHU
the brachial artery.
The brachial artery is on the inner side of the patient’s upper arm.
1 to 2 cm
Make sure that the INDEX ARTERY “ ” is within the range. If outside
the
range, there will be greater error in the blood
pressure value. In this case, use the appropriate cuff size.
* Attach the cuff so that the bottom edge is 1 to 2 cm from the inner
side of the elbow joint.
* The cuff should be wrapped to a tightness that roughly allows two
fingers to be inserted under the cuff.
'XULQJPHDVXUHPHQWNHHSWKHEUDFKLDODUWHU\RQZKLFKWKHFXII
is wrapped at the same height as the right atrium of the heart.

Omron HBP-1120 Specifications

General

Brand	Omron
Model	HBP-1120
Category	Blood Pressure Monitor
Language	English