1
NX-series Communication Control Unit/Safety Control Units
NX-CSG/SL5/SI/SO
Quick, easy, and flexible to integrate
safety into production lines
• Two built-in CIP Safety on EtherNet/IP ports
• Up to 254 connections (NX-SL5700)
• Up to 32 NX Units per Communication Control Unit
• Innovative automation software
Automatic Programming
Safety Data Logging
Online Functional Test
• Meets EN ISO 13849-1 (PLe/Safety Category 4)
and IEC 61508 (SIL3)
* The Common Industrial Protocol (CIP™) is an industry standard open network,
enabling seamless communication among CIP networks. CIP Safety™ adds
safety functionality to CIP networks.
* Safety over EtherCAT (FSoE): The open protocol Safety over EtherCAT
(abbreviated with FSoE "Safety over EtherCAT") defines a safety related
communication layer for EtherCAT. Safety over EtherCAT meets the
requirements of IEC 61508 SIL 3 and enables the transfer of safe and standard
information on the same communication system without limitations with regard
to transfer speed and cycle time.
Features
• CIP Safety on EtherNet/IP Is Supported
• Feature EtherNet/IP Communications Port
• The Standard Unit of NX-series Available
• Excellent Connectability with OMRON Safety I/O Devices
• Support for the IEC 61131-3 Programming Environment
• Program Languages Based on the IEC 61131-3 International Standard
• Programming with Variables
• Complete Advanced Validation
• Checking Safety Programs and Safety Parameters
• Debugging
Trademarks
• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and other countries for OMRON factory automation products.
• Microsoft, Windows, Windows Vista, Excel, and Visual Basic are either registered trademarks or trademarks of Microsoft Corporation in the United States and other
countries.
•EtherCAT
®
is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
• Safety over EtherCAT
®
is a registered trademark and a patented technology licensed by Beckhoff Automation GmbH, Germany.
• ODVA, CIP
TM
, CompoNet
TM
, DeviceNet
TM
, EtherNet/IP
TM
, and CIP Safety
TM
are trademarks of ODVA.
• The SD and SDHC logos are trademarks of SD-3C, LLC.
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
Copyrights
• Microsoft product screen shots reprinted with permission from Microsoft Corporation.
• This product incorporates certain third party software. The license and copyright information associated with this software is available at http://www.fa.omron.co.jp/
nj_info_e/.
To Next Page
Need help?
General
