Omron POWLI User Manual

60
7. Using the UPS monitoring software and contact signal
When using the included "UPS service driver", the OS standard UPS service in Windows Server 2003/XP/2000
can be used. When there is a power failure, les can automatically be saved and the computer can be shut
down.
1. Connect the UPS to a computer.
* Only 1 computer can be connected to the UPS
Cable: Included connection cable (RS-232C or USB)
* The RS232C cable and USB cable cannot be used at the same time.
BU1002SWG
信号カード
増設
RS232C
Connector
Connect to
RS-232C
terminal
Connect to RS-232C
port on PC
Included connection cable(RS-232C)
Connector
Connect to
RS-232C
connector on UPS
<RS-232C>
<USB>
BU1002SWG
Connector
Connect to
USB
terminal
Connect to USB
port on PC
Included connection cable(USB)
Connector
Connect to
USB Port
on UPS
BU3002SWG
Connector
Connect to
RS-232C
terminal
Connect to RS-232C
port on PC
Included connection cable(RS-232C)
Connector
Connect to
RS-232C
connector on UPS
Connector
Connect to
USB
terminal
Connect to USB
port on PC
Included connection cable(USB)
Connector
Connect to
USB Port
on UPS
BU3002SWG
2. Install the included "UPS service driver" on the computer.
Software to install: UPS service driver
How to install: Refer to the separate "UPS monitoring software installation guide".
7-2
When performing auto-save functions using the
UPS service in Windows Server 2003/XP/2000 +
UPS service driver

Omron POWLI Specifications

General

Brand	Omron
Model	POWLI
Category	UPS
Language	English