Omron POWLI User Manual

66
7. Using the UPS monitoring software and contact signal
●
Remote ON/OFF circuit
UPS side
remote ON/OFF（
+
）
remote ON/OFF（
-
）
Example of
remote ON/OFF
Notes
●
When connecting a device such as a relay that generates counter electromotive force to the
signal output circuit, connect diodes that prevent counter electromotive force to both ends of the
relay.
Explanation
●
When power is restored after the unit stopped automatically during a power failure, the unit
automatically restarts and supplies power. If you do not want to start the connected devices, turn
OFF their switches or set the auto startup setting after recovery from power failure (setting switch
2 ) to ON (Auto startup is not performed). (See page 34.)
9. Precautions and notes for the use of the Contact Signal

Omron POWLI Specifications

General

Brand	Omron
Model	POWLI
Category	UPS
Language	English