3-4
CHAPTER 3 Installation
4) Securely x the installation base on the oor with anchor bolts.
WARNING
DO NOT PLACE THE ROBOT ON A MOVING INSTALLATION BASE.
EXCESSIVE LOADS WILL BE APPLIED TO THE ROBOT ARM BY
MOVEMENT OF THE INSTALLATION BASE, RESULTING IN DAMAGE
TO THE ROBOT.
CAUTION
THE MANIPULATOR POSITIONING MIGHT DECREASE IF THE
INSTALLATION SURFACE PRECISION IS INSUFFICIENT.
CAUTION
IF THE INSTALLATION BASE IS NOT SUFFICIENTLY RIGID AND
STABLE OR A THIN METALLIC PLATE IS ATTACHED TO THE
INSTALLATION BASE, VIBRATION (RESONANCE) MAY OCCUR DURING
OPERATION, CAUSING DETRIMENTAL EFFECTS ON THE
MANIPULATOR WORK.
To Next Page
Loading...
Need help?
General
