Onan CCK Series Operator's Manual And Parts Catalog

MAINTENANCE SCHEDULE
Use factory recommerjded maintenance schedule (based
on favorable operating conditions) to serve as a guide
to get long and efficient plant life. Neglecting routine
maintenance can result in failure or permanent damage
to the plant. Maintenance is divided into two cate¬
gories:
1. Operator maintenance — performed by the operator.
2. Critical maintenance — performed by qualified
service personnel (Onan dealer).
OPERATOR MAINTENANCE SCHEDULE
XI Perform more ofcen in extremely dusty cendUions.
For any abnormalities in operation, unusual noises
from engine or generator, loss of power, overheating,
etc., contact your ONAN dealer.
CRITICAL MAINTENANCE SCHEDULE
MAINTENANCE ITEMS
OPERATIONAL HOURS
Cf<eck Breaker Poin
Check Brushes
Remove Carbon & Lead
Check Valve Clearance
Clean Carburetor
Clean Generator
Remove & Clean Oil Base
General Overhaul
xl Perform more ofcen In extremely dusty conditions.
^‘x2 Replace collector ring brushes when worn to 5/16'' or
less. Replace commutator brushes when worn to S/s"
CLEARANCES
Spark Plug Gap 0.025"
BOLT TORQUES FT.-LB.
Spark Plu(s 25-30
Cylinder Head 29-31
Oil Base Mounting 43-48
Tappets (Intake & Exhaust) O.OIO" to 0.012"
Ignition Breaker Points Gap 0.020"
Ignition Timing I9°BTC
17

Onan CCK Series Specifications

General

Brand	Onan
Model	CCK Series
Category	Portable Generator
Language	English