Onan CCK Series Operator's Manual And Parts Catalog

INSTALLATION
(
If the mobile electric power plant is to operate properly,
it must be correctly installed. This manual gives some
of the more important aspects of installation. For
more details, a Technical Bulletin (T-OIS) is available
from Onan.
Ventilation is the most important factor to be consid¬
ered. The unit must have enough cooling air to operate
safely and efficiently. The heated air must be disposed
of to keep the engine from overheating and losing
power.
For the CCK electric plant running at 1800 rpm, the
——unt of air discharged is 750 efm. The minimum
free air inlet with no filter or restriction is 140 sq. in.
Onan Vacu-Flo cooled units are specifically designed
for mounting in small compartments (where proper
cooling is difficult) and are equipped to provide suf¬
ficient cooling air and adequate disposition of heated
air. With this type of cooling, a centrifugal fan in a
scroll housing pulls cooling air into the compartment
and over the cooling fins and surfaces of the engine.
Heated air is expelled through a single discharge and
away from the unit and installation area.
TYPICAL -SLIDE OUT " TRAY FOR COMPARTMENT MOUNTING
EXHAUST
CONNECTION
BEVEL MUST BE
BACK PAR ENOUGH
SO AS NOT TO LET
TRAY BOCK WHEN
IN POSITION.

Onan CCK Series Specifications

General

Brand	Onan
Model	CCK Series
Category	Portable Generator
Language	English