AC Portable Models: These sets have outlet recep-
tacles of the grounding type which serve for easy
connection and disconnection of the
load.
Matching
electrical plugs or caps must be provided on the load
wires.
Output Lead Markings Generator leads are marked
Ml,
M2, etc. These identifying marks also appear on
the wiring diagram.
Switchboard: When an optional wall mounted
switchboard containing ammelers, voltmeters, circuit
breakers, is used, these load wire connections apply:
Connect to the unused terminal of each ammeter, one
ungrounded (hot) generator
lead.
Connect to the
ground stud in the switchboard, generator leads and
load wires which are to be grounded — if any.
Connect to the unused terminal of each circuit
breaker, one ungrounded (hot) load wire. On models
which generate more than one voltage, the voltmeter
reads the higher voltage shown on the nameplate.
The lower voltage is correct when the higher voltage
is correct.
To Next Page
Loading...
Need help?
General
