14
3
4
ENTER
1
2
Setting the clock
Setting the clock
1. Press the TIMER button until “ADJUST” is selected on the
display, then press the ENTER button.
The day of the week will flash on the display.
2. Press the
buttons until the desired day of the week is
selected, then press the ENTER button.
The time will flash on the display.
3. Use the
buttons to set the desired time.
4. Press the ENTER button.
The clock will start operating. When you set the clock while the
unit is in the standby mode, the present time will continue to be
displayed. When you set the clock while the unit is on, the nor-
mal display will be resumed.
TIMER
ENTER
TIMER
ENTER
ENTER
TAPE
CD
TIMER
ENTER
+
10
7
8
9
0
4
5
6
2
3
1
CLOCK
CALL
CLEAR
REPEAT
MEM
SLEEP
RANDOM
MUTING
A.PRESENCE
STANDBY/ ON
INPUT
TUNER
PRESET
To Next Page
Loading...
Need help?
General
