20
Playing CDs—Continued
Selecting Files in All Folder Mode
This mode can only be used while playback is stopped.
Tip:
• You can also use the Stop [2] button (press and hold)
and [MENU/ENTER] jog dial on the CD receiver.
Note:
• The behavior of Stop [2] on the CD receiver can be
set from “STOP KEY” (see page 22).
■ Cancelling Navigation or All Folder Mode
To cancel Navigation mode or All Folder mode while
selecting MP3/WMA files, return to upper hierarchy and
press the Stop [2] button.
■ To Select Folders and Files by Number
Use the number buttons as shown in the examples
below to enter folder numbers.
(Audio CD)
For example, to specify file #8, press [8].
To specify file #34, press [>10], [3], and [4].
To specify file #134, press [>10], [1], [3], and [4].
(MP3/WMA CD)
Press [>10] once to select the files, twice to select
the folders and enter the numbers.
You can display various information about the
MP3/WMA file currently playing, including ID3 tags
such as title, artist name, and album name.
• Elapsed time
If the elapsed time is more than 99 minutes and 59
seconds, “– –:– –” is displayed.
•File name
•Folder name
•Title name (if ID3 tag present)
•Artist name (if ID3 tag present)
• Album name (if ID3 tag present)
• Sampling rate and bit rate
Note:
• If a file or folder name contains any characters that
cannot be displayed, an underscore will be displayed
in place of those characters. Alternatively, you can set
the CD receiver so that names containing such
characters are displayed as “File_n” or “Folder_n”,
“n” being the file or folder number (see page 22).
4
To access files or subfolders inside another
folder, select the folder, and then press Play
[1] button.
Use the Previous and Next [7]/[6] buttons to
select the files and subfolders within that folder.
To move up a level, press the Pause [3] button.
5
To start playback, press the [ENTER] or Play
[1] button.
Tip:
• You can also use the Stop [2] button and
[MENU/ENTER] jog dial on the CD receiver.
Note:
• The behavior of Stop [2] on the CD receiver can
be set from “STOP KEY” (see page 22).
1
While playback is stopped, press the Pause
[3] button.
The CD receiver enters All Folder mode, and “1”
appears on the display.
2
Use the Previous and Next [7]/[6]
buttons to select the other folders.
To play the first file in the selected folder, go to Step
4.
3
To access the files inside the folder, press
the Play [1] button.
To select the files in the folder, repeat the step 2.
To select another folder, press the Pause [3] button
again, and then use the Previous and Next
[7]/[6] buttons to select it.
4
To start playback, press the [ENTER] or Play
[1] button.
Tip:
• If a folder contains more than 99 files, single- and
double-digit file numbers must be preceded by
zeros.
Displaying MP3/WMA Information
During playback, press the [DISPLAY] button
repeatedly to display the following MP3/WMA
information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
