Troubleshooting
• There's no sound
• Make sure your iPod/iPhone
is
actually playing.
• Make sure your iPod/iPhone
is
inserted properly in
the
Rl
Dock.
• Make sure your
amp
is
turned on,
the
correct
input
source
is
selected, and
the
volume
is
turned up.
• Make sure
the
plugs are pushed in all
the
way.
• Make sure
the
AC
adapter
is
connected
to
a suit-
able wall
outlet
and connected
to
the
RI
Dock.
• The
RI
Dock's remote controller doesn't
control your iPod/iPhone
•
If
the
RI
Dock
is
placed on
top
of
another compo-
nent,
the
remote controller's signal may be
obstructed and
the
remote controller may
not
work
reliably.
In
this
case,
try
repositioning
the
Rl
Dock.
• Make sure your iPod/iPhone
is
properly inserted in
the
RI
Dock.
• When you
use
the
RI
Dock's remote controller,
point
it
toward
the
RI
Dock
(see
page
7).
• Some
of
the
remote controllers
buttons
work
dif-
ferently depending on
the
OSD
mode:
On
or
Off
(see
page
6).
• Your amp's remote controller doesn't con-
trol your iPod/iPhone
• Make sure your iPod/iPhone
is
properly inserted in
the
RI
Dock.
•
If
your amp's remote controller
has
remote mode
buttons, make sure you've selected
the
right
mode.
• Check
the
RI
Dock's
Rl
MODE
switch setting.
• When you
use
your amp's remote controller,
point
it
toward your amp.
• The
RI
Dock must be connected
to
your
amp
with
both
an
R I cable and an audio cable
..
• Make sure
the
RI
Dock's
RI
MODE
switch setting
and the remote control
mode
match this setting.
See
your amp's manual for more information.
If
you still can't control your iPod/iPhone, start
playback by pressing your iPod/iPhone model's
Play
button.
Remote operation should then be
possible.
• Make sure your amp/s remote controller
is
set
to
the
correct remote
controllD.
• The onscreen display doesn't
appear
on
your
TV
•
Set
the
OSD
mode
to
On
(see
page
9).
• Try setting
the
TV
system
to
PAL
or
NTSC
(see
page
12).
• Select
the
video
output
mode (composite/compo-
nent) according
to
the
video
input
on your
TV
(see
page
9).
•
To
watch an iPod/iPhone slideshow or
video
on
TV
•
Set
the
OSD
mode
to
Off, and use your
iPod/iPhone model's controls or remote controller
to
select and start
the
slideshow
or
video.
•
To
control
the
slideshow, follow standard
iPod/iPhone operating procedures.
Specifications
Power supply:
AC
adapter
(5
V
DC)
Power consumption (iPod/iPhone
not
inserted):
North American model: 0.8 W
Other models:
0.8
W
Weight: 0.66Ibs. (300
g)
Dimensions (W x H x
D):
4-5/16 x 2-1/8 x4-7/16 inches
110 x 54 x 112
mm
Connectors:
VIDEO
OUT (COMPONENTNIDEO)
AUDIO OUT
L/R
Rljack
Specifications and features are subject
to
change
without
notice.
In
catalogs and on packaging,
the
letter at the end
of
the
product
name indicates
the
color. Specifications
and operation are the same regardless
of
color.
• The operating instructions in this manual may
change
with
future upgrades
to
the
iPod/iPhone
software.
• The
AC
adapter supplied
with
the
Rl
Dock
is
designed exclusively for use
with
the
RI
Dock. Do
not
use
it
with
another device. Likewise,
do
not
use
any other
AC
adapter
with
the
Rl
Dock. Doing
so
may damage
the
RI
Dock.
•
If
there's any noise when listening
to
an
FM
orAM
radio station on your
tuner
or receiver,
try
mov-
ing its antenna away from
the
Rl
Dock,
iPod/iPhone, and
AC
adapter's cable. In addition,
don't
wrap
the
AC
adapter's cable around any
other cables.
I
15
To Next Page
Loading...
Need help?
General
