EasyManuals Logo
Home>Onkyo>Receiver>HT-RC260

Onkyo HT-RC260 User Manual

Onkyo HT-RC260
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
En
Connect your components to the appropriate jacks. The default input assignments are shown below.
: Assignment can be changed ( 35).
Note
When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack
will be given a higher priority.
The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks.
*1
Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially
available phono preamp.
If your turntable has a moving coil (MC) type cartridge, you’ll need a commercially available MC head amp or MC transformer as
well as a phono preamp. See your turntable’s manual for details.
With connection D, you can listen and record audio from the external components while you are in Zone 2. You can lis-
ten and record audio from the external components in the main room; you can listen to the audio in Zone 2 as well.
With connection C, you can enjoy Dolby Digital and DTS. (To record or listen in Zone 2 as well, use C and D.)
With connection
D, if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to
connect the main stereo.
How to record the video
With the connections described above, you cannot record the video through the AV receiver. To make a connection for
video recording ( 27).
Connecting External Components
The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to
the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.
No. Jack Signal Components Assignable
A
AUX INPUT LINE IN Analog audio Portable audio player
VIDEO Composite video Camcorder, etc
AUDIO L/R Analog audio
B
COMPONENT
VIDEO
IN 1 (BD/DVD) Component video Blu-ray Disc/DVD player
IN 2 (CBL/SAT) Satellite, cable, set-top box, etc.
OUT TV, projector, etc.
C
DIGITAL IN OPTICAL IN 1 (GAME) Digital audio Game console
IN 2 (TV/CD) TV, CD player
COAXIAL IN 1 (BD/DVD) Blu-ray Disc/DVD player
IN 2 (CBL/SAT) Satellite, cable, set-top box, etc.
D
MONITOR OUT Composite video TV, projector, etc.
BD/DVD IN Analog audio and
composite video
Blu-ray Disc/DVD player
VCR/DVR IN VCR or DVD recorder/Digital
Video Recorder
CBL/SAT IN Satellite, cable, set-top box, etc.
GAME IN Game console
TV/CD IN Analog audio
TV, CD player, Turntable
*1
,
Cassette tape deck, MD, CD-R
E
UNIVERSAL PORT Analog audio/
Video
Universal port optional dock
(UP-A1 etc.)
A
E
B
D
C
Front Rear

Table of Contents

Other manuals for Onkyo HT-RC260

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-RC260 and is the answer not in the manual?

Onkyo HT-RC260 Specifications

General IconGeneral
BrandOnkyo
ModelHT-RC260
CategoryReceiver
LanguageEnglish

Related product manuals