To Next Page

To Previous Page

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Additional Function (Firmware Update)

This unit is equipped with a function to update the rmware via USB port when the rmware update is announced after purchase. This enables various functions to be

added and operations to be improved.

Depending on the manufacturing timing of the product, the rmware may be switched to the updated one. In such a case, new functions may be added from the start.

For how to conrm the latest rmware contents and the rmware version of your product, see the following section.

Update Information of the rmware

For the latest rmware contents and the rmware version, visit our company’s website. If the rmware version of your product di󰀨ers from the latest one, it is

recommended to update the rmware.

To conrm the rmware version of your product, press the button on the remote controller, and refer to "6. Miscellaneous" - "Firmware Update" - "Version" ( p83).

Operation of added new functions

If functions are added or changed from contents described in the Instruction Manual, see the following reference.

Supplementary Information ≫

❏ Firmware Update Procedure ( p6)