Onkyo HT-S5910 User Manual

18
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Surround Speakers
The supplied Surround Speakers have left and right designations.
The grille net cannot be removed.
1. Wall mount hole: The speaker system may be mounted to a wall by
suspending speakers on wooden screw using the wall mount hole.
• Wooden wall mount screw is not included. Please consult with a
construction service personnel and prepare screw considering its type,
material, and length so it provides sufcient support. Moreover, please also
install a reinforcement panel, anchor, etc. if necessary.
• Our company bears no responsibility in the case of accident or injury
sustained due to improper installation, insufciently mounting, misuse,
natural disaster, etc.
9mm
4mm
2. Speaker jack: Use the included speaker cable to connect to the main unit.
• Do not place objects on the speaker system. The speaker system may drops
or fall over by losing balance and may cause an injury.
 Notice ( p20)



Onkyo HT-S5910 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
4Ω speaker support	No
Audio output channels	5.1.2 channels
Total Harmonic Distortion (THD)	0.08 %
Dynamic power per channel (3 Ohm)	160 W
Power output per channel (20-20KHz@8 Ohm)	115 W
Display	LCD
Product color	Black
Audio decoders	Dolby Atmos
Damping factor	60
Amplifier output power	925 W
HDMI in	4
Composite video in	3
Digital audio coaxial in	1
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	0
Audio (L/R) out	7
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Supported radio bands	AM, FM
AC input voltage	120 V
AC input frequency	60 Hz

Weight and Dimensions

Depth	328 mm
Width	453 mm
Height	160 mm
Weight	7800 g