EasyManuals Logo
Home>Onkyo>Home Theater System>HT-S5910

Onkyo HT-S5910 User Manual

Onkyo HT-S5910
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
96
Troubleshooting
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/off or disconnecting/
connecting the power cord, which is easier than working on the connection,
setting and operating procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or audio is not output or the
HDMI linked operation does not work, disconnecting/connecting the HDMI cable
may solve it. When reconnecting, be careful not to wind the HDMI cable since
if wound the HDMI cable may not t well. After reconnecting, turn off and on the
unit and the connected device.
The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet, wait at least 5
seconds, and then plug it back in.
Our company is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit’s malfunction. Before you record
important data, make sure that the material will be recorded correctly.
When the unit is operating erratically 97
Try restarting the unit 97
Resetting the unit
(this resets the unit settings to the default) 97
Troubleshooting 98
Power 98
Audio 98
Listening Modes 100
Video 101
Linked operation 101
Tuner 102
BLUETOOTH function 102
ZONE B function 103
Remote Controller 103
Display 103
Others 103

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-S5910 and is the answer not in the manual?

Onkyo HT-S5910 Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Input sensitivity200 mV
4Ω speaker supportNo
Audio output channels5.1.2 channels
Total Harmonic Distortion (THD)0.08 %
Dynamic power per channel (3 Ohm)160 W
Power output per channel (20-20KHz@8 Ohm)115 W
DisplayLCD
Product colorBlack
Audio decodersDolby Atmos
Damping factor60
Amplifier output power925 W
HDMI in4
Composite video in3
Digital audio coaxial in1
Digital audio optical in2
Ethernet LAN (RJ-45) ports0
Audio (L/R) out7
Connectivity technologyWired
Speakers connectivity typeClamp terminals
Supported radio bandsAM, FM
AC input voltage120 V
AC input frequency60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth328 mm
Width453 mm
Height160 mm
Weight7800 g

Related product manuals