Onkyo TX-8130 User Manual

29
It
De
Various settings
Adjusting sound quality, etc.
1. Press the AUDIO button.
2. Press the direction ( / ) buttons to select the setting
you want to adjust.
3. Press the direction ( / ) buttons to adjust the
setting.
∫ Direct
You can use the Direct feature that outputs pure sound as
it was intended by bypassing the tone control circuits
during play.
On
Off
(default setting)
0 “DIRECT” appears on the display when “On” is
selected.
0 “Bass” and “Treble” are disabled when “On” is
selected.
∫ Bass
Adjusts the bass level.
Select between
j10 dB and i10 dB in 2 dB
increments. (default setting: 0 dB)
∫ Treble
Adjusts the treble level.
Select between
j10 dB and i10 dB in 2 dB
increments. (default setting: 0 dB)
∫ Balance
Adjusts the audio output balance between the left and
right speakers.
Select between
Li10 and Ri10 in 2 steps
increments. (default setting: 0)
Sleep timer
With the sleep timer, you can set the unit so that it
automatically turns off after a specified period.
1. Press the SLEEP button repeatedly to select the time.
0 With the SLEEP button, you can set the sleep time
from 90 to 10 minutes in 10 minute increments.
The setting is complete 5 seconds after you have
displayed the desired time.
0 When the sleep timer has been set, “SLEEP”
appears on the display.
∫ Checking the remaining time: If you press the
SLEEP button, the remaining time until the unit will be put
into standby mode appears.
∫ To cancel the sleep timer: Press the SLEEP button
repeatedly until “SLEEP” disappears.
AUDIO
, , ,
SLEEP
TX-8130_mst.book 29 ページ ２０１５年１１月２日 月曜日 午後１時１６分

Onkyo TX-8130 Specifications

General

Display	-
Product color	Black
Audio decoders	Not supported
Center speaker impedance	4 Ω
Package weight	10500 g
Package depth	419 mm
Package width	572 mm
Package height	264 mm
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	2 W
Power consumption (typical)	200 W
AM band range	522 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Internet radio services supported	Spotify, TuneIn
Receiver type	stereo
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	- channels
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	0.08 %
Dynamic power per channel (3 Ohm)	170 W
Dynamic power per channel (4 Ohm)	150 W
Dynamic power per channel (8 Ohm)	90 W
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	- W
Wi-Fi	No
HDMI in	0
Ethernet LAN (RJ-45) ports	1
Phono inputs (RCA)	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	FLAC, LPCM, MP3, OGG, WAV, WMA

Weight and Dimensions

Depth	328 mm
Width	435 mm
Height	149 mm
Weight	7900 g