Onkyo TX-930 User Manual

Specifications
AMPLIFIER SECTION
Power Output:
Total Harmonic Distortion:
IM Distortion:
Damping Factor:
Frequency Response:
RIAA Deviation:
Sensitivity and Impedance:
Phono Overload:
Signal-to-Noise Ratio:
Tone Controls:
Loudness (—30dB):
Muting:
TUNER SECTION
FM:
Tuning Range:
Usable Sensitivity:
50dB Quieting Sensitivity:
Capture Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Alternate Channel Attenuation:
AM Suppression Ratio:
Harmonic Distortion:
Frequency Response:
stereo Separation:
Stereo Threshold:
AM:
Tuning Range:
Usable Sensitivity:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Harmonic Distortion:
GENERAL
Power Supply:
Dimensions (W x H x D):
Weight:
Remote control transmitter RC-2235
Transmitter:
Signal range:
Power supply:
TX-930
60 watts per channel, min. RMS, at 8 ohms, both
channels driven, from 40Hz to 20kKHz, with no
more than 0.2% THD.
0.1% at 30 W
0.1% at 30 W
50 at 8 ohms
20 — 30,000 Hz + 1dB
20 — 20,000 Hz + 0.8dB
Phono: 2.5mV/50 kohms
CD/Tape Play: 150mV/50 kohms
Tape Rec: 150mV/3.5 kohms
120mV RMS at 1 kHz, 0.2% THD
Phono: 80dB (at 5mV input, IHF-A)
CD/Tape: 100dB GHF-A)
Bass: + 10dB at 100 Hz
Treble: + 10dB at 10 kHz
+7dB at 70 Hz, +5d8 at 10 kHz
™ O&O
87.9 — 107.9MHz (200kHz steps)
worldwide models
87.50 — 108.00MHz (50kHz)
Mono: 12 .4cBf, 2.3uV
Stereo: 18.2dBf, 4.5uV.
Mono: 18.2dBf, 4.5uV
Stereo: 38.2dBf, 45uV
1.5dB
40dB
90dB
Mono: 70dB
Stereo: 65dB
55dB
50dB
Mono: 0.15%
Stereo: 0.30%
30 — 15,000 Hz + 1.5dB
40dB at 1 kHz
17.2dBf, 4uV
530 — 1710kHz (10kHz steps)
worldwide models
531 — 1602kHz (9kHz steps)
30uUV
40dB
40dB
40dB
0.8%
AC120V, 60Hz
worldwide moadeils
AC120V, 60Hz
455 x 120 x 316 mm
17-15/16" « 4-6/8" « 12-7/16"
8.0 kg., 17.6 lbs.
Infrared
Approx. 5 meters (16ft. 4")
Two “AA” batteries (1.5V x 2)
TX-910
45 watts per channel, min. RMS, at 8 ohms, both
channels driven, from 40Hz to 20kHz, with no more
than 0.3% THD.
0.1% at 30 W
0.1% at 30 W
50 at 8 ohms
20 — 30,000 Hz + 1dB
20 — 20,000 Hz + 0.8dB
Phono: 2.5mV/50 kohms
CD/Tape Play: 150mV/50 kohms
Tape Rec: 150mV/3.5 kohms
120mV RMS at 1 kHz, 0.38% THD
Phono: 80dB (at 5mV input. IHF-A)
CD/Tape: 100dB (IHF-A)}
Bass: + 10dB at 100 Hz
Treble: + 10dB at 10 kHz
+7dB at 70 Hz, +5dB at 10 kHz
—~ GO
87.9 — 107.9MHz (200kHz steps)
worldwide models
87.50 —- 108.00MHz (50kHz)
Mono: 12. 4dBf, 2.3uV
Stereo: 18.2dBf, 4.5nV.
Mono: 18. 2dBf, 4.5uV
Stereo: 38. 2dBf, 45uV
1.5dB
40dB
90dB
Mono: 70dB
Stereo: 65dB
55dB
50dB
Mono: 0.15%
Stereo: 0.30%
30 — 15,000 Hz + 1.5dB
40dB at 1 kHz
17.2dBf, 4uvV
530 — 1710kHz (10kHz steps)
worldwide models
531 — 1602kHz (9kHz steps)
30uV
40dB
40dB
40aB
0.8%
AC120V, 60Hz
worldwide models
AC120V. 60Hz
455 x 120 x 316 mm
17-15/16" = 4-6/8" « 12-7/16"
7.2 kg., 15.9 lbs.
Specifications and features are subject to change without notice.
_14—

Onkyo TX-930 Specifications

General

Brand	Onkyo
Model	TX-930
Category	Amplifier
Language	English