161
Troubleshooting
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/o or disconnecting/
connecting the power cord, which is easier than working on the connection,
setting and operating procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or audio is not output or the
HDMI linked operation does not work, disconnecting/connecting the HDMI cable
may solve it. When reconnecting, be careful not to wind the HDMI cable since
if wound the HDMI cable may not t well. After reconnecting, turn o and on the
unit and the connected device.
• The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet, wait at least 5
seconds, and then plug it back in.
• Our company is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit’s malfunction. Before you record
important data, make sure that the material will be recorded correctly.
When the unit is operating erratically 162
Try restarting the unit 162
Resetting the unit
(this resets the unit settings to the default) 163
Troubleshooting 164
Power 164
Audio 164
Listening Modes 166
Video 167
Linked operation 167
Tuner 168
BLUETOOTH function 168
Network function 169
USB storage device 170
Wireless LAN Network 170
ZONE B function 171
Multi-zone function 171
Remote Controller 171
Display 171
Others 172
To Next Page
Loading...
Need help?
General
