57
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Connecting an AV Component in a Separate Room (Multi-zone Connection)
Connecting a TV (ZONE 2)
While a disc is played on a Blu-ray Disc player in the main room (where this unit
is located), you can play the video and audio of the same Blu-ray Disc player or
another AV component on the TV equipped with an HDMI IN jack in a separate
room (ZONE 2). The TV in the separate room can play only the video of devices
connected to the HDMI IN1 to IN3 jacks of this unit.
• Audio from an externally connected AV component can be output only when
the audio is 2ch PCM audio signal. Also, the audio output of the AV component
may need to be changed to the PCM output.
Setup
• When video and audio via HDMI input are output to ZONE 2, set "1. Input/
Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( p131) to "Use" on the
Setup menu.
a HDMI cable
a
TV
To Next Page
Loading...
Need help?
General
