EasyManuals Logo

Onkyo TX-SR373 User Manual

Onkyo TX-SR373
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Controls and displays
1
1
7
2
33
4
Loading the batteries
The batteries included with the unit are to check initial
operations; they may not last over a long period. We
recommend using alkaline batteries that have a longer life.
WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a
heater. This can cause batteries to leak, overheat, explode
or catch fire. It can also reduce the life or performance of
batteries.
CAUTION
Incorrect use of batteries may result in such hazards as
leakage and bursting. Observe the following precautions:
-
Never use new and old batteries together.
-
Insert the plus and minus sides of the batteries properly
according to the marks in the battery case.
-
Batteries with the same shape may have different
voltages. Do not use different batteries together.
-
When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
-
When inserting the batteries, make sure not to damage
the springs on the battery’s (–) terminals. This can cause
batteries to leak or overheat.
Operating range of remote control
The remote control may not work properly if:
There are obstacles between the remote control and the
receiver’s remote sensor.
Direct sunlight or fluorescent light is shining onto the
remote sensor.
The receiver is located near a device that is emitting
infrared rays.
The receiver is operated simultaneously with another
infrared remote control unit.
30°
7 m
30°

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-SR373 and is the answer not in the manual?

Onkyo TX-SR373 Specifications

General IconGeneral
Impedance16 Ω
Receiver typestereo
Input sensitivity200 mV
Audio output channels5.2 channels
Signal-to-Noise Ratio (SNR)106 dB
Total Harmonic Distortion (THD)0.06 %
Power output per channel (20-20KHz@8 Ohm)135 W
HDMI in4
AC (power) inYes
Composite video in2
USB ports quantity1
Connectivity technologyWired & Wireless
Speakers connectivity type-
Ethernet LANNo
AM band range530 - 1700 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Preset stations quantity30
DisplayLCD
Product colorBlack
Audio decodersDTS-HD, Dolby TrueHD
Package weight9500 g
AC input voltage120 V
AC input frequency60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)210 W
Weight and Dimensions IconWeight and Dimensions
Depth430 mm
Width435 mm
Height247 mm
Weight8000 g

Related product manuals