12
Remote controller
SEND/LEARN indicator
Lights red when signals are sent by the remote controller. It also
flashes when a button is pressed when the battery power is low.
ON/STANDBY button [33]
ON: Press to turn on the TX-SR700/700E/600/600E.
STANDBY: Press to place the TX-SR700/700E/600/600E in the
standby state.
Be aware that pressing the STANDBY button only places the TX-
SR700/700E/600/600E in standby and does not turn the power
completely off.
SLEEP button [47]
Press to set the sleep function.
The SLEEP button enables you to set the TX-SR700/700E/600/
600E to turn off automatically after a specified time period.
MACRO 1, 2 button [73]
Press to program or execute the macro function.
MODE buttons and indicators [44, 45, 64-66]
Press to select the component to be operated by the remote
controller. When a MODE button is pressed, it will light green (RC-
482M) or red (RC-480M) for 8 seconds. The selected MODE button
will also light whenever any other operation button is pressed.
RETURN button [36]
Press to enter the selected setting and return to the previous menu.
CH , DISC button
Press to select a preset channel for the tuner (CH). [41]
When the CD mode is selected, also press to select a disc when
operating components with disc changers (DISC). [64]
CH SEL/TOP MENU button
Press to select a speaker channel when adjusting the speaker level
(CH SEL). [39]
When the DVD mode is selected, press to display the menu screens
of the DVD player (TOP MENU). [65]
AUDIO SEL/TV/VCR button [47]
Press to select the audio input signal. The setting changes from
“Auto” to “Multich” (only if DVD is selected as the input source) to
“Analog” and back each time this button is pressed.
LEVEL /ANGLE and LEVEL /SUBTITLE buttons
Press to adjust the volume of the speaker selected using the CH SEL
button (LEVEL / ). [39]
Press the ANGLE button to select a camera angle when playing a
DVD-Video with multiple angle playback.
Press the SUBTITLE button to select a subtitle language when
playing a DVD-Video. [65]
CD/TAPE/DVD/MD operation buttons [63-66]
Press to operate other Onkyo components connected to the TX-
SR700/700E/600/600E using the
terminals.
To Next Page
Loading...
Need help?
General
