Onkyo TX-SR600 User Manual

41
Listening to Radio Broadcasts
Presetting a radio station
1. Tune into the radio station you desire (see “Tuning
into a radio station”).
2. Press the MEMORY button on the
front panel.
The MEMORY indicator lights red.
3. Using the PRESET / buttons,
select a preset number (from 1 to 40)
to assign the station.
4. Press the ENTER button to finalize
the procedure.
The memory indicator turns off and the
assigned number lights.
This programs the radio station as a preset radio station.
• Up to 40 stations can be stored in memory as preset radio
stations.
“MEMORY”
(Lights red)
Flashes
Selecting a preset radio station
1. Press the TUNER input source
button.
2. Press the PRESET / buttons and
select the number of the desired
preset station.
When using the remote controller:
1. Press the RCVR MODE button.
The RCVR MODE button lights green
(RC-482M) or red (RC-480M).
2. Press the TUN button.
3. Press the CH button and select
the number of the desired preset
station.
Erasing a preset radio station
This can only be performed at the TX-SR700/700E/600/600E.
1. Press the TUNER button and press
the PRESET
/ buttons to select the
preset radio station that you want to
erase (see above).
2. Press and hold the MEMORY button
and then press the FM MODE button.
The selected preset station is erased.
AUTO
TUNED
ch
MEMORY
MEMORY
FM MODE
ENTER
TUNER
CH
TUN
RCVR
MODE
PRESET
/
ch
Lights
AUTO
TUNED
ch

Onkyo TX-SR600 Specifications

General

Brand	Onkyo
Model	TX-SR600
Category	Receiver
Language	English