STORAGE
1.
To store the ERGO6.0 AIR ROWER, simply keep it in a clean dry place.
2.
To avoid damage to the electronics, remove the batteries from the CONSOLE MONITOR(19) before
storing the ERGO6.0 AIR ROWER for one year or more.
3.
Move the ERGO6.0 AIR ROWER with the TRANSPORT WHEELS(66) on the FRONT STABILIZER
(4). Lift the Rear Stand of the RAIL FRAME(2) to move the ERGO6.0 AIR ROWER. Refer to the
illustration below. Do not use the SEAT(51) to move the ERGO6.0 AIR ROWER. The SEAT(51) will
move and the SEAT CARRIAGE(10) may pinch your hand or fingers.
4.
The MAIN FRAME(1) and the RAIL FRAME(2) can be
separated to minimize the unit size for storage. Remove the
PULL PIN(98) from the MAIN FRAME(1). Lift up the MAIN
FRAME(1) and pull out the RAIL FRAME(2) to separate.
Insert the PULL PIN(98) back to the hole in the MAIN
FRAME(1) for storage.