Orbit T944 User Manual

Running belts centering
A
Put the treadmill on a flat ground and
have the treadmill run at 6-8 km/hour to
check if it drifts
If it drifts to the right side, turn adjusting
knob(36) on right side 1/4 circle
clockwisely, check if it drifts. Repeat the
steps above until it centers, see picture A.
B
If it drifts to the left side, turn adjusting
knob(36) on left clockwisely, check if it
drifts. Repeat the steps above until it
centers, see picture B
The running belts will loosen in a certain
amount of time. So to solve this problem,
turn adjusting knob(36) on both side 1/4
circle clockwisely, check if it drifts. Repeat
the steps above until it centers, see
picture C
C
16

Orbit T944 Specifications

General

Brand	Orbit
Model	T944
Category	Treadmill
Language	English