Oricom UHF2190 User Manual

14
Operation
Operation
Turning the Unit ON/OFF
To Turn ON;
a. Rotate the POWER/VOL button clockwise until the LCD
screen turns ON and displays the current channel.
To switch OFF;
b. Rotate the POWER/VOL button counter clockwise until
the LCD screen turns blank.
Note: Every time you rotate the Power/Vol button to turn ON, the
volume will also open. The volume level will increase or
decrease by rotating the Power/Vol button.
Changing Channels
The radio has 77 available channels, to communicate with other
radios, it must be tuned to the same channel.
a. Press the MENU button once, the current channel
number ashes on the LCD Screen.
b. Press the UP or DOWN button to select the desired
channel. The channel changes from 1 to 80, or vice versa.
c. Press the PTTbuttontoconrmthechannelsetting.
Channels 1 to 8 and 41 to 48 are used for repeaters and are paired
with higher channels as output/input (1/31, 2/32, etc.)
Check for local repeater activity before using these channels in
Simplex mode to avoid interference. Channels 9 and above are the
best choices for general use in Simplex mode.
Youcanndmoreinformationaboutchannelsandfrequenciesby
visiting the Web site http://www.acma.gov.au
Note: Refer to the “Channel Table” section of this Owner’s Manual
for detailed frequency listing.
OR011253 UHF2190_2195 User Guide_11-07-14.indd 14 2014/11/7 14:31:11

Oricom UHF2190 Specifications

General

Brand	Oricom
Model	UHF2190
Category	Two-Way Radio
Language	English