English 7
OPERATING INSTRUCTIONS
Before Use
[01] Place on a dry, rm, heat-resistant surface. Always enabling the minimum air circulation
clearances (10 cm to the left side, to the right side, to the top and back of the product).
Figure 8Figure 7
[02] Make sure the voltage of the outlet is the same as the voltage of the rating place of your
toaster oven.
[03] Remove all accessories and packing materials from inside the unit.
[04] Remove and clean rack and crumb/grease tray with hot water, a small amount of
dishwashing liquid and a non-abrasive sponge or cleaning pad.
[05] Dry the unit thoroughly before using.
[06] Place the accessories back inside the unit, and plug the toaster oven into the appropriate
electrical outlet.
[07] Turn unit on by selecting the maximum baking temperature (250ºC) for 30 min (minutes).
This process will help to eliminate any possible residue from the heating elements that might
have stayed in the unit during the manufacturing process. It is normal for products with heating
elements (such as ovens) to release some smoke during the rst use. This initial process
helps to eliminate odors and vapors generated by the insulating material and protective
greases from the manufacturing process. Perform this procedure in a well-ventilated room.
Note: Perform this procedure in a ventilated room with the windows open. If the smoke and smell
persist for a long time, turn off the product and take it to the nearest Authorized Oster® Service
Center.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
