EasyManuals Logo
Home>Ouellet>Heat Pump>OTP-B18000D

Ouellet OTP-B18000D User Manual

Ouellet OTP-B18000D
25 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Installing and maintaining a healthy filter
24
Installation Instructions
Cleaning and MaintenanceCleaning and Maintenance
Service Life
Fig. a
Healthy lter
Air lter
Healthy lter
Fig. b
Fig. c
Fig. d
1. Pull the front panel from the two ends in the direction
indicated by the arrows. Then pull the air filter downwards to
remove it. (See Fig.a)
2. Mount the healthy filter onto the air filter,(as shown in Fig.b). If
the air filter cannot be in- stalled, please mount the healthy
filter on the front case. (A shown in Fig.c).
3. Mount the air filter properly along the arrow direction in Fig.d,
and then close the panel cover.
Remove the healthy filter before cleaning and reinstall it after cleaning according to the installation
instructions. Note that silver ion filters cannot be cleaned with water, while active carbon, photocata-
lyst, low-temperature conversion (LTC) catalyst, formaldehyde eliminator, ca- techin or mite killing fil-
ters can, but d
o not brush or rub with hard objects. Dry it in the shade or sun after cleaning, but do
not wipe dry
The healthy filter is usually effective for one year under normal condition as for silver ion filters are no
longer effective when the surface becomes black (green).
This supplementary instruction is provided as reference for the unit with healthy filter. If the
graphics provided herein are different f
rom the physical goods, the latter shall prevail. The quantity
of healthy filters shall be based on the actual delivery.
Installation et entretien du filtre sanitaire
24
Instructions d’installation
Nettoyage et entretien
Service à vie
Fig. a
Healthy lter
Air lter
Healthy lter
Fig. b
Fig. c
Fig. d
1.
Retirez le panneau selon la direction des flèches en le tenant
par les deux extrémités. Tirez le filtre à air vers le bas (voir figure a).
2. Fixez le filtre sanitaire au filtre à air (comme l’indique la figure
b). S’il est impossible d’installer le filtre à air, fixez le filtre
sanitaire à l’avant de l’appareil (comme l’indique la figure c).
3. Fixez le filtre à air selon la direction des flèches de la figure d
et refermez le panneau.
Retirez le filtre sanitaire pour le nettoyer et réinstallez-le selon les instructions. Prenez note que les filtres à
ions argent ne peuvent pas être nettoyés avec de leau, ce qui nest pas le cas pour les filtres à charbon
actif, photocatalytiques, à catalyseurs qui se convertissent à basse température, les éliminateurs de
formaldéhyde, les catéchines ou les acaricides. Ne frottez pas le filtre avec une brosse ou avec des objets
durs. Faites-le sécher dans un endroit sombre ou au soleil après lavoir lavé. Ne lessuyez pas.
G
énéralement, le filtre sanitaire ne peut être utilisé que pendant un an dans des conditions normales
d’utilisation. En ce qui a trait au filtre à ions argent, il est désuet lorsque sa s
urface devient noire
(verte).
Ces instructions supplémentaires sont fournies à titre de référence pour l’appareil qui comporte un
filtre sanitaire. Si les schémas de ce manuel diffèrent de l’appareil, l’appareil prévaut. La quantité de
filtres sanitaires dépend de l’utilisation de l’appareil.
Filtre à air
Filtre sanitaire
00687_Unité_de_Climatisation_Murale_Ouellet_Climatiseur Mobile8.5x11 An+FR 15-08-13 13:51 Page25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ouellet OTP-B18000D and is the answer not in the manual?

Ouellet OTP-B18000D Specifications

General IconGeneral
BrandOuellet
ModelOTP-B18000D
CategoryHeat Pump
LanguageEnglish

Related product manuals