Ovention Shuttle S1200 User Manual

Form No. OVSM-0116
13
OPERATION
Editing Setpoint Temperatures
Use the following procedure to edit or create the setpoint
temperature(s) available at oven startup. This procedure
requires access to password-protected screens and should be
performed by authorized personnel only.
1. From the Main Recipes screen, touch the “up” arrow.
• A password keypad will appear on the touchscreen.
2. Input the password using the keypad, and touch ENTER.
• The Admin Mode screen will appear on the touchscreen.
Admin Mode Screen
3. Touch TEMPS to access the Edit Setpoint Data screen.
• The oven can store up to three setpoint temperatures.
Edit Setpoint Data Screen
4. Touch the desired setpoint to edit. The “Edit Setpoint”
window will appear.
• Touch TEMP to edit the
setpoint temperature using
the keypad that appears, then
touch ENTER. The Edit
Setpoint Data screen
reappears.
Temps RecipesBack
USB LogsMaint
ADMIN MODE
ADMIN MODE465 F465 F
Touch to return to
Main Recipes screen.
Touch to access
Edit Setpoint Data screen.
Touch to access
Recipe Development
screen.
Touch to access
Maintenance Mode
screen.
Touch to access
USB Functions
screen.
Touch to access
Logs Detail
screen.
Unit of Measure:
F = Fahrenheit, C = Celsius
Touch to save
and return to
Admin Mode screen.
Touch each setpoint to
edit setpoint name
and temperature.
• Touch NAME to edit the setpoint name using the keypad
that appears, then touch ENTER. The Edit Setpoint Data
screen reappears.
5. Repeat step 4 to edit another setpoint name/temperature.
6. When the setpoint temperature changes are complete,
touch EXIT ANDSAVE to return to the Admin Mode screen.
• If programming is complete, touch BACK to return to the
Main Recipes screen.
Changing Temperature Unit of Measure
Use the following procedure to change the temperature unit of
measure between fahrenheit and celsius. This procedure
requires access to password-protected screens and should be
performed by authorized personnel only.
1. From the Main Recipes screen, touch the “up” arrow.
• A password keypad will appear on the touchscreen.
2. Input the password using the keypad, and touch ENTER.
• The Admin Mode screen will appear on the touchscreen.
3. Touch MAINT to access the Maintenance Mode screen.
Maintenance Mode Screen
4. Touch CONFIG on the Maintenance Mode screen. The
Oven Configuration screen appears.
5. Touch TEMP MODE on the Oven Configuration screen to
toggle the unit of measure between fahrenheit and celsius
Oven Configuration Screen
Touch to access
Oven Configuration
screen.
Touch to return to
Admin Mode screen.
Touch to access
Sound Settings
screen.
Touch to access
Diagonostics Mode
screen.
Touch to access
Set Time/Date
screen.
Touch to return to
Maintenance Mode screen.
Touch to toggle between
fahrenheit and celcius.

Ovention Shuttle S1200 Specifications

General

Brand	Ovention
Model	Shuttle S1200
Category	Oven
Language	English