50
12.2 Cooling Operation
• Cooling operation can be set using remote control.
• This operation is applied to cool down the room temperature to the setting temperature set on the remote control.
• The remote control setting temperature, which takes the reading of intake air temperature sensor, can be
adjusted from 16°C to 30°C.
• During cooling operation, the compressor will stop and restart as shown in figure below:
12.2.1 Cooling Operation Time Diagram (For CS-A9MKD CU-A9MKD and CS-A12MKD
CU-A12MKD)
To Next Page
Loading...
Need help?
General
