5. Operation
12
(EN)
Power: Turn on the circuit breaker
beforehand, referring to the
operating instructions for the
unit.
1. Press
.
2. Press
and select from among Auto
,
Heat
,
Dry
, Cool and Fan .
3. Press
and select the desired speed.
If set to Auto , the fan speed switches
automatically. (Auto does not work in Fan
mode.)
4. Press one of the buttons
and set the desired temperature.
Temperature settings cannot be made in
Fan mode.
MAX (°C) MIN (°C)
Auto
27 17
Heat
30 16
Dry / Cool
30 18
Stop: Press .
When the unit is stopped with the remote controller, the fan on the outdoor
unit may continue to run for a while, even though the compressor of the
outdoor unit stops.
Auto , Heat
, Dry
, Cool
, Fan
Models that only provide the cooling function cannot operate in the auto or
heating mode.
1
4
2
3
To Next Page
Loading...
Need help?
General
