Panasonic Diga DMR-EX97 User Manual

Getting started
SQT0994
14
Connection
3D programmes can be played back when this unit is connected to 3D compatible terminal of a
3D compatible TV.
• Keep the RF coaxial cables as far away as possible from other cables.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• If you use an optional HDMI cable, use the High Speed HDMI cables. Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
When outputting 1080p or 24p signal, please use HDMI cables 5.0 meters or less.
The HDMI-compliant cable is supplied with this unit.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (> 78)
Basic connections
HDMI
VHF/UHF
RF IN
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
(supplied)
To the aerial
Aerial cable
RF coaxial cable
(supplied)
Cooling fan
DMR-EX97EB_eng.book 14 ページ ２０１５年８月２４日 月曜日 午後１時２８分

Panasonic Diga DMR-EX97 Specifications

General

Brand	Panasonic
Model	Diga DMR-EX97
Category	DVD Recorder
Language	English