54
VQT2J46
Editing still pictures and music
[HDD] [RAM] [SD]
[-R] (JPEG)
≥You can edit pictures and albums.
≥You cannot edit still pictures recorded on DVD-R DL, CD-R/
CD-RW and USB memory.
≥You cannot edit still pictures recorded on finalised DVD-R.
Preparation
≥Press [DRIVE SELECT] to select the HDD, DVD or SD drive.
≥[RAM] [SD] Release protection (> 70, Setting the protection).
1 Press [DIRECT NAVIGATOR].
[HDD] [RAM] When “PICTURE” is not selected, press the
“Green” button to select “PICTURE”.
2 Editing an album:
Select the album to be edited and
press [OPTION].
≥When you want to create an album using “Create Album”,
press [OPTION] without selecting album.
Editing a still picture:
3 Press [3, 4] to select the operation
and press [OK].
∫ To edit the album
(e.g., [HDD])
∫ To edit still picture
(e.g., [HDD])
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [DIRECT NAVIGATOR].
After performing steps 1–3 (> left)
§
Multiple editing is possible.
[Change Date : Only when the “Picture (JPEG) View” screen is
displayed]
Editing still pictures (JPEG)
1 Select the album which contains the still
picture to edit and press [OK].
2 Select the still pictures to edit and press
[OPTION].
To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[OK].
≥You can also press [:, 9] to show other pages.
Multiple editing
Select with [3, 4, 2, 1] and press [;]. (Repeat.)
A check mark appears. Press [;] again to cancel.
To select all albums
Press [∫]. After confirmation message appears, press
[2, 1] to select “Yes”.
Slideshow Settings
Add Pictures
Create Album
Edit Album
Copy to DVD
VIDEO/MUSIC
Playlist View
Start Slideshow
Change Date
Set up Protection
Cancel Protection
Delete Album
Album (still picture)
and picture
operation (@ right)
Start Slideshow/Slideshow Settings
(> 43, 44)
Switch to Playlists (Picture) (> 56)
Properties
Change Date
Set up Protection
Cancel Protection
Album View
Delete Pictures
Album (still picture) and picture
operation (> right)
You can go back to Album View.
Album (still picture) and picture operation
Delete
Pictures
§
Delete
Album
§
[HDD] [RAM] [SD]
[-R] (JPEG)
Press [2, 1] to select “Delete” and
press [OK].
≥Once deleted, the recorded contents are
lost and cannot be restored. Make certain
before proceeding.
≥When deleting an album, files other than the
still picture files inside the album will also be
deleted. (This does not apply to folders under
the album concerned.)
≥[-R] Available space does not increase even
after pictures are deleted.
Change
Date
§
[HDD] [RAM]
You can change the date of the picture.
1 Press [2, 1] to select the item and press
[3, 4] to change.
2 Press [OK].
Enter
Album
Name
[HDD] [RAM] [SD]
You can give names to albums.
(> 49, Entering text)
≥Album names input using this unit may not be
displayed on other equipment.
Set up
Protection
§
Cancel
Protection
§
[HDD] [RAM] [SD]
If set, this will protect the
still picture or album from
accidental deletion.
Press [2, 1] to
select “Yes” and
press [OK].
The lock symbol appears
when the still picture or album is protected.
≥Even if the protection setting is used by this
unit to protect an album, the album may be
deleted by another unit.
Properties
[HDD] [RAM] [-R]
[-R]DL] [CD]
[USB] [SD]
Information (e.g., image size and file size) is
shown.
≥To exit the Properties screen, press [OK].
Add
Pictures
Create
Album
[HDD] [RAM] [SD]
1 Press [2, 1] to select “Start” or “Yes”
and press [OK].
2 Press [3, 4, 2, 1] to select the album
that contains the still picture you want to
add and press [OK].
3
Press [
3
,
4
] to select the item and press [OK].
≥If “Select pictures to copy” is selected:
Select the still picture you want to add and
press [OK].
≥
If “Copy all pictures” is selected:
All the still pictures in the album will be copied.
4 Press [2, 1] to select “Yes” or “No” and
press [OK].
≥If you want to continue copying, select
“Yes” and go to step 2.
Only for “Create Album”
5 Press [2, 1] to select “Yes” or “No” and
press [OK].
≥If “Yes” is selected:
You can give names to albums. (> 49,
Entering text)
≥If “No” is selected:
The album name is automatically given.
Copy to
DVD
§
[HDD]
Copy to
HDD
§
[RAM]
For copy to DVD-RAM or HDD
Press [2, 1] to select “Start” and
press [OK].
For copy to DVD-R
Press [
2
,
1
] to select “Copy & Finalise”
or “Copy Only” and press [OK].
≥[-R]
Use blank discs or unfinalised discs on
which JPEG images are recorded with this unit.
DIRECT NAVIGATOR P
0001
Album Name
103
0002
HDD
DMR-EX99VEG-VQT2J46_eng.book 54 ページ ２０１０年１月１４日 木曜日 午前１０時３１分
To Next Page
Loading...
Need help?
General
