Listening to voicemail messages
When new messages have been recorded:
– “Voicemail msg. via phone co.” is
displayed if message indication service is
available.
– The message indicator on the handset
flashes slowly if the message indicator is
turned on (page 64).
Handset
1 MMENUN#330
R The speakerphone turns on.
2 Follow the pre-recorded instructions.
3 When finished, hang up.
Note:
R You can also use the MACCESSN soft key,
if displayed, to play new voicemail
messages.
R If the handset still indicates there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding # until the handset beeps.
Base unit
*1
*1 KX-TGE470 series: page 4
To listen to voicemail messages, you have to
dial your voicemail access number manually.
Wall mounting
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Base unit
1 Lead the AC adaptor cord and telephone
line cord through the hole in the wall
mounting adaptor in the direction of the
arrow.
2 Tuck the telephone line cord inside the
wall mounting adaptor (A). Connect the
AC adaptor cord and telephone line cord
(B).
To Next Page
Loading...
Need help?
General
