Menu Settings
64
VQT0V86
∫ Finely adjusting the white balance
(white balance fine adjustment )
You can adjust the white balance finely
when you cannot acquire the desired hue
by setting the white balance.
• Set the white balance to [ ]/[ ]/[ ]/
[].
• You can even set the white balance in
Underwater mode.
1 Press 3 [ ] several times until
[WB ADJUST.] appears and then
press 2/1 to adjust the white
balance.
• 2 [RED]: Press when the hue is
bluish.
• 1 [BLUE]: Press when the hue is
reddish.
• Select [0] to return to the original white
balance.
2 Press [MENU/SET] to finish.
• You can also press the shutter
button halfway to finish.
• The white balance icon on the screen
turns red or blue.
About the white balance
• When you take a picture with the flash, the
white balance is automatically adjusted
[except for [ ] (Daylight)]. However, the
white balance may not be properly
adjusted if the flash level is insufficient.
• The white balance cannot be set in simple
mode [ ] and scene mode.
About the white balance fine adjustment
• You can finely adjust the white balance
independently for each white balance
item.
• The white balance fine adjustment setting is
reflected in the picture when using the flash.
• The white balance fine adjustment setting is
memorized even if the camera is turned off.
• The white balance fine adjustment level in
[ ] (White set) returns to “0” when you
reset the white balance using White set
[].
• You cannot finely adjust the white balance
when [COL.EFFECT] (P69) is set to
[COOL], [WARM], [B/W] or [SEPIA].
Press [ ] to display the [REC] mode
menu and select the item to set. (P62)
ISO is a measure of sensitivity to light. The
higher the sensitivity is set, the less light is
needed to take a picture so the camera
becomes more suitable for recording in
dark places.
• When setting to [AUTO], the ISO
sensitivity is automatically adjusted from
[ISO80] to [ISO200] according to the
brightness. (It can be adjusted from
[ISO80] to [ISO400] when using the flash.)
BLUERED
WB ADJUST.
SELECT
EXIT
MENU
[SENSITIVITY]
Setting the light sensitivity
ISO sensitivity 80 400
Use in bright
places
(e.g. outdoors)
Suitable
Not
suitable
Use in dark
places
Not
suitable
Suitable
Shutter speed Slow Fast
Noise Less Increased
/SET
MENU
VQT0V86ENG.book 64 ページ ２００６年１月３０日 月曜日 午前９時４６分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
