Recording pictures (basic)
44
VQT0S19
Taking Pictures with the Self-timer
1
Switch the self-timer setting.
4 : Self-timer set to 10 seconds
L
5 : Self-timer set to 2 seconds
L
No display (canceled)
2
Focus on the subject to take the
picture.
• The self-timer indicator
1 blinks and the
shutter is activated after
10 seconds (or 2
seconds).
• If you press the [MENU]
button when the self-timer is set, the self-
timer setting is canceled.
• When you press the button fully with one
stroke, the subject is automatically
focused just before the recording. In dark
places, the self-timer indicator blinks and
then it may turn on brightly to work as the
AF assist lamp (P77) for focusing on the
subject.
• The self-timer is fixed at 2 seconds when
you are using [SELF PORTRAIT] in scene
mode (P69).
• When you set the self-timer in the burst
mode, the number of pictures taken at
one time is fixed to 3.
• When using a tripod or in other cases,
setting the self-timer to 2 seconds is a
convenient way to stabilize the jitter
caused by pressing the shutter button.
• We recommend using a tripod when
setting the self-timer. (When using a
tripod, be sure to confirm that the tripod is
stable when this unit is attached.)
SCN
1
SCN
2
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
