43
SQT1404 (ENG)
Wi-Fi
Operating the camera by connecting it to a
smartphone
Installing the smartphone app “Panasonic Image App”
The “Image App” is an application provided by Panasonic.
Supported OS Android™: Android 4.0 or later
iOS: iOS 7.0 or later
Installation procedure
Connect your device to a network
(Android) Select “Google Play™ Store”
(iOS) Select “App Store”
Enter “Panasonic Image App” or “LUMIX” to search
for the app
Select “Panasonic Image App” and install it
• Use the latest version.
• Supported OS versions as of October 2016. Supported OS versions may be changed without
prior notice.
• The service may not be able to be used properly depending on the type of smartphone being
used.
For the latest information on the “Image App”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)
• When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
• For details about the operating procedure, etc., refer to [Help] in the “Image App” menu.
• If you connect the camera and smartphone over a Wi-Fi connection and run “Image App”,
[Help] may not be displayed in the “Image App” menu for some smartphones. In such a case,
disconnect the Wi-Fi connection with the camera, connect the camera to a cellular data line
such as 3G and LTE, or the Internet to display [Help] in the “Image App” menu.
• Some of the screens and information provided in this document may be different depending on
the supported operating system and “Image App” version.
To Next Page
Loading...
Need help?
General
