12 VQT3E45 VQT3E45 13
I
nserting and removing the card (optional)/
the battery
(Continued)
■
To remove
• To remove battery:
move lever in direction of arrow.
• To remove card:
press down in center.
Lever
●
Always use genuine Panasonic batteries.
●
If you use other batteries, we cannot guarantee the quality of this product.
●
Remove battery from camera after use.
• Keep the battery in a plastic bag, making sure that it is kept away from metallic
objects (such as clips) when carrying or storing the battery.
●
To remove the card or battery, turn the camera off and wait until the LCD monitor
display is completely blank. (Failure to wait may cause the camera to malfunction and
may damage the card or recorded data.)
●
Keep the Memory Card out of reach of children to prevent swallowing.
●
The unusable battery should be discarded in accordance with battery recycling laws.
Call the RBRC hotline at 1-800-822-8837 for information.
Using the DC coupler (optional) instead of battery
By using the AC adaptor (optional) and DC coupler (optional), you can record and play
back without worrying about the remaining battery charge.
The optional DC coupler can only be used with the designated Panasonic AC adaptor.
Insert DC coupler instead of
battery
Open DC coupler cover
• If difficult to open, press the DC
coupler cover from inside to open it.
Close the card/battery door
and slide the door in until
you hear a locking sound
Plug AC adaptor into power
outlet
Connect AC adaptor to DC IN
socket of DC coupler
●
Always use a genuine Panasonic AC adaptor (optional).
●
Use the AC adaptor and DC coupler specifically for this camera. Using other adaptors
or couplers could cause camera failure.
●
The possibility to install the camera on a tripod or unipod when the DC coupler is
connected depends on the type of tripod or unipod.
●
The camera cannot stand upright when the AC adaptor is connected. If you are leaving
the camera on a surface as you work, it is recommended to place it on a soft cloth.
●
When the AC adaptor is connected, always remove the AC adaptor when opening the
card/battery door.
●
Remove the AC adaptor and DC coupler when not in use and close the coupler cover.
●
Also read the AC adaptor and DC coupler operating instructions.
DC IN socket
DC coupler
DC coupler cover
To connect, face the
cable mark to the LCD
monitor
AC adaptor
To Next Page
Loading...
Need help?
General
Weight and Dimensions
