16 VQT3E45 VQT3E45 17
The clock is not set when the camera is shipped.
Setting the clock
●
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures at a digital photo center or when using [Date Stamp].
●
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
Press the Power button
The power is turned on.
If the language select screen is not displayed,
proceed to step
.
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
Press [MENU/SET]
Power button
[MENU/SET]
Press ◄► to select the items (year, month, day, hour, minute,
display order or time display format), and press ▲▼ to set
Select the
setting
item
Change
the values
and
settings
Select either [24hrs] or [AM/PM]
for the time display format.
Select the display order for the day, month, and year
([M/D/Y], [D/M/Y], or [Y/M/D]).
• To cancel → Press [ / ].
Press [MENU/SET]
Confirm the setting and press [MENU/SET]
• To return to the previous screen, press [ / ].
• Turn on power again and check time display.
(Time and date can be displayed by pressing ▼ several times.)
Select [Clock Set] from [Setup] or [Rec] menu, perform and .
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in the camera for 24 hours
beforehand.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
