VQT4U14 (ENG)
16
Inserting and Removing the Card
(optional)/the Battery
• Check that this unit is turned off.
• Confirm that there is no foreign object.
• We recommend using a Panasonic card.
1: Slide the [LOCK] switch A, and
release the lock.
2: Slide the release lever B and open
the side door.
•
Always use genuine Panasonic batteries
(DMW-BCM13E).
• If you use other batteries, we cannot guarantee
the quality of this product.
Battery: Being careful about the battery
orientation, insert all the way until you
hear a locking sound and then check that
it is locked by lever C. Pull the lever C in
the direction of the arrow to remove the
battery.
Card: Push it securely all the way until
you hear a “click” while being careful
about the direction in which you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
D: Do not touch the connection terminals of the card.
Close the side door until it clicks, and
then lock the [LOCK] switch by sliding it
toward [2].
•
Confirm that the red part on the [LOCK] switch is not
showing.
Note
• Keep the Memory Card out of reach of children to prevent swallowing.
DMC-FT5&TS5GH-VQT4U14_eng.book 16 ページ ２０１３年１月３０日 水曜日 午後１２時８分
To Next Page
Loading...
Need help?
General
