VQT4U14 (ENG)
20
When [GPS Setting] is set to [ON], positioning is performed at regular intervals. When the
positioning is successful, location name information and latitude/longitude are acquired.
Press [MENU/SET].
Press 3/4/2/1 to select [GPS/Sensor] menu, and then press
[MENU/SET].
Press 3/4 to select [GPS Setting], and then press [MENU/SET].
Press 3/4 to select [ON], and then press [MENU/SET].
•
Exit the menu after it is set.
∫ About the Icon indicating positioning status
Positioning is performed by this unit when radio waves from 3 or more GPS satellites
are received.
• The bar moves up the scale according to the number of GPS satellites from which signals are
being received.
When the bar has filled the scale and positioning has been successful, the indicator goes
blue.
Acquiring of the GPS information
DMC-FT5&TS5GH-VQT4U14_eng.book 20 ページ ２０１３年１月３０日 水曜日 午後１２時８分
To Next Page
Loading...
Need help?
General
