EasyManuals Logo

Panasonic NN-SD372S User Manual

Panasonic NN-SD372S
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Example: To cook at P 6 (MEDIUM)
power for 1 m nute 30 seconds
= Power
Level
C22223
Press 5 times
i2.
Time/Weight
0
Press Power Level
until the desired
power level appears
in the display window.
Set Cooking Time to 1
minute and 30 seconds
using Time Select Dial.
i3. Press Start.
_Cooking will start.
start The time in the
I I display window wilt
count down.
Press Power Level
once P10 (HIGH)
twice P9
3 times P8
4 times P7
5 times P6
6 times P5
7 times P4
8 times P3
9 times P2
10 times P1
(MED-HIGH)
(MEDIUM)
(MED-LOW)/DEFROST
(LOW)
NOTES:
1. For more than one stage cooking, repeat
steps 1 and 2 for each stage of cooking
before pressing Start Button. The maxi-
mum number of stages for cooking is 3.
When operating, two beeps will sound
between each stage. Five beeps will
sound at the end of the entire sequence.
2. When selecting P10 (HIGH) power for
the first stage, you may begin at step 2.
3. When selecting P10 (HIGH) power, the
maximum programmable time is 30 min-
utes. For other power levels, the maxi-
mum time is 1 hour and 30 minutes.
4. For reheating, use P10 (HIGH) for liq-
uids, P7 (MED-HIGH) for most foods and
P6 (MEDIUM) for dense foods.
5. For defrosting, use P3 (MED-LOW).
DO NOT OVER COOK. This oven requires
less time to cook than an older unit. Over
cooking wilt cause food to dry out and may
cause a fire. A microwave oven's cooking
power tells you the amount of microwave
power available for cooking.
Quick lVlinFeature
This feature allows you to set or add
cooking time in 1 minute increments up to
10 minutes.
To Set Cooking Time:
1. Press Quick Min until
the desired cooking
time (up to 10 min-
QuickMin utes) appears in the
[_ display window.
Power Level is pre-set
at P10.
2. Press Start.
Cooking begins and the
Start time wilt count down. At
I I the end of cooking, 5
beeps sound.
NOTES:
1. If desired, you can use other power
levels. Select desired power level
before setting cooking time.
2. After setting the time by Quick IVlin
Button, you can not use Time Dial.
3. Quick Min Button can be used to add
more time during manual cooking.
,Keep Warm Feature
This feature will keep food warm for up to
30 minutes after cooking.
Example:Tokeep2cupsofgravywarmfor10minutes.
1 Keep
= Warm
2.
Time/Weight
©
=
Start
I
Press Keep Warm.
Set warming time using
Time Select Dial, up to
30 minutes.
Press Start.
Keep Warm wilt
start. The time in
the display window
will count down.
NOTE:
Keep Warm can be programmed as the
final stage after cook time/s have been
manually entered. It cannot be used in
combination with auto features.
12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic NN-SD372S and is the answer not in the manual?

Panasonic NN-SD372S Specifications

General IconGeneral
Control typeButtons
Product colorStainless steel
Door open typePush
Turntable size285 mm
Microwave power950 W
Integrated clockYes
Number of power levels10
GrillNo
Connected load1200 W
Power requirements120 V, 60 Hz
Weight and Dimensions IconWeight and Dimensions
Weight9525 g

Related product manuals