50
Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically. The image will be enlarged 3
times and rotated 90-degree.
SETUP for PORTRAIT
(Example)
Notes:
• During Touch Pen mode, “PORTRAIT SETUP” becomes “OFF” and this function cannot be used.
• When using the PORTRAIT function with displays set vertically, “DISPLAY ORIENTATION” in SETUP menu has to be
set to “PORTRAIT” (see page 47).
• Turn up the power switch for the upward direction when you set Display vertically.
• During Portrait display, the 3D images are displayed as 2D images.
Press to select the PORTRAIT SETUP.
Press to select “ON” or “OFF”.
Note:
If you set PORTRAIT SETUP to ON, MULTI
DISPLAY SETUP will be unavailable.
Press to select SEAM HIDES VIDEO.
Press to select “OFF” , “ON”.
How to setup PORTRAIT
1
2
3
To hide joints between displays.
Suitable for moving image display.
To show joints between displays.
Suitable for still image display.
ON OFF
OFF
PORTRAIT SETUP
SEAM HIDES VIDEO
OFF
1
OFF
VIDEO WALL UNIFORMITY
VIEWING AREA
LOCATION
16:9
PORTRAIT SETUP
OFF
PORTRAIT SETUP
SEAM HIDES VIDEO
OFF
1
OFF
VIDEO WALL UNIFORMITY
VIEWING AREA
LOCATION
16:9
PORTRAIT SETUP
Select “PORTRAIT SETUP” in “SETUP” menu and press button.
To Next Page
Loading...
Need help?
General