This section explains the basic operations of the VL-V901 lobby station (Video Intercom System for Apartment
Complexes) when used with the VL-MV74/VL-MV75 main monitor.
For further information about features and operations, visit our Web site and find the document:
https://panasonic.net/cns/pcc/support/intercom/v900
12.1 Controls
12.1.1 Lobby station
A
Heat sensor
Turns on the display when a visitor is detected.
B Lens cover
C Light
Illuminates subjects in dark environments.
D Display
E Keypad
F Speaker
G Camera lens
H Microphone
I
Search buttons ( and )
Used to select items shown on the display.
J
Cancel button ( )
K
Call button ( )
12.2 Lobby station operations
12.2.1 Calling a resident
Entering a room number
1. Enter the resident’s room number.
2. Press M N to call.
Searching by first letter of the name
1. Press M
N.
2. Use the keypad to enter the first letter of the resident’s name.
R Press a key repeatedly to scroll through the letters assigned to that key.
R Note the hints displayed at the bottom of the screen.
3. Press M
N or M N to search for the desired name.
4. Press M N to call.
Searching through all names
1. Press M N.
2. Press M N or M N to search for the desired name.
3. Press M N to call.
Switching the image displayed on the main monitor
While talking to the main monitor, press M#N to switch the image displayed on the main monitor from the lobby station
to the camera. To return to the lobby image, press M N.
30
12. . VL-V901 basic operations
12. VL-V901 basic operations