Panduit TDP46HET/E User Manual

© Panduit Corp. 2022
USER MANUAL
TDP43HET, TDP43HET/E,
TDP46HET,TDP46HET/E
B20733-02 Page 12 of 39 08-2022
2.3.2 Indicators
LED
Status
Indication
Off
The printer power is turned off
On
The printer power is turned on
On
Printer is ready
Blinking
Pause
Downloading data into printer.
ERROR
Off
Printer is ready
On
“CARRIAGE OPEN” or “CUTTER ERROR”
Blinking
“NO PAPER”, “PAPER JAM”, “NO RIBBON” or “CLEAN DATA”
2.3.3 Front Panel Keys
Keys
Function
1. The Select Keys allow the user to select left or right options based on
what is shown on the touch screen.
The Navigational Keys allow the user to navigate between menu options
shown on the touch screen.
2.4 Setting up the Printer (Driver Install potentially)
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug
the power cord into a properly grounded power outlet.
Note: Please switch printer power to OFF (O), before plugging the power cord into the power
cord socket.

Panduit TDP46HET/E Specifications

General

Brand	Panduit
Model	TDP46HET/E
Category	Printer
Language	English